Get started with the Command Line Interface (CLI)

Hologram offers open-source command-line and language SDK tools to easily enable you to manage devices and data.

Hologram CLI

Hologram’s Command Line Interface is an easy-to-use command set for managing cellular modems and sending data to and from devices.

It’s designed to be run on small Linux devices such as the Raspberry Pi, which are connected to the internet using a USB cellular modem.

You can learn more by reading through the Hologram CLI documentation.

Hologram CLI Quick Reference

For a full list of commands:

hologram --help

Send a message:

sudo hologram send -t

Receive inbound messages (try sending from the Hologram Dashboard):

sudo hologram receive

Bring up/down an internet connection:

sudo hologram network connect
sudo hologram network disconnect

Check signal strength:

sudo hologram modem signal

Check network operator:

sudo hologram modem operator

Get u-blox CellLocate Location:

sudo hologram modem location
Was this article helpful?
0 out of 0 found this helpful